Applied inside buildings and premises, in trays, cable channels, in duct, tubes and blocks. It is also applied on outer sides of buildings and for opticalal cords manufacturing.
- 3Halogen free flame-retardant jacket
- 2Strength member: aramid rods
- 1Optic fiber
Perfect solution as a cable guided to the customer’s home or office
High crush resistance
Easy to terminate and install – easiest access to fibers
Lower cost compared to Duplex Cables
Wide range of operating temperatures. Installation temperature down to -40° C
Allowable tensile strength up to 80 N
Crush — from 143 lb/in
Tensile strength — 18 lb — operation; 34 lb — installation
|Fiber count||Up to 8|
|Cable dimension, in||0.08×0.12|
|Cable weight, lb/ft||0.003|
|Min bending radius, in||0.591|
At Customer’s request Incab can provide specifications for any range of fiber optic cable.
|Operation temperature range*||-10°С…+50°С|
|Installation temperature range||-10°С…+50°С|
|Transportation and storage temperature range||-60°С…+70°С|
|Min bending radius||10xcable diameter|
|Life time||25 years|
|Warranty lifetime||as specified in the supply agreement, min 2 years|
* Operation temperature range can be increased on request.
Local cables can be produced in versions (A)-HF, (А)- HFLTx and (А)-FRHFLTx.
(A)-HF — cable jacket is made of a polymer material, flame retardant in a group laying, with low smoke emission, halogen-free (Class PRGP1).
(A)-HFLTx — the cable jacket is made of a polymer material, flame retardant in a group laying with low toxicity of combustion products.
(A)-FRHFLTx — the cable jacket is made of a fire-resistant polymer material, flame retardant in a group laying, not emitting corrosive gases when burning and smoldering with low toxicity of combustion products.
The aramid rods (OVP-2A version) can be used as strength elements.