Applied in the construction of fiber-optic link on overhead transmission lines of 35 kV and more.
Applied for aerial installation on distribution and high voltage power lines, as well as railway catenary.
For fiber optic monitoring systems.
Used for stationary installation when the optical fiber needs extra protection from mechanical damages.
Applied in tubes, ducts, trays, blocks, tunnels, collecting channels, with no risk of rodent attacks. Also applied for aerial installation between supports and buildings on external strength members or using the winding method.
Applied in ducts, trays, blocks, tunnels, collecting channels, with a risk of rodent attacks.
Applied in harsh environments with potential mechanical impact: in all ground types, swamps and harsh rivers.
Applied in sea areas (coastal shelf and deep-sea), on navigable rivers, in lakes and water storage basins, in harsh environments, in bogs and unnavigable rivers.
InAir Figure 8
Applied for aerial installations: on power lines, lamp posts, between buildings and constructions. Suitable for aerial installation on transmission equipment and power facilities in dielectric package.
Applied inside buildings (including vertical runs), in trays, channels, on outer sides of buildings, as well as in duct, in tubes and blocks. Suitable for blowing-in into protecting polyethylene tubes.
Applied inside buildings and premises, in trays, cable channels, in duct, tubes and blocks. It is also applied on outer sides of buildings and for optical cords manufacturing.
Applied for aerial installation on transmission towers, lamp posts, between buildings and constructions.
Steel optical module, clad wire and temporary optical cable.
For individual installation in cable structures and working spaces.
Central strength member (fiberglass reinforced plastic)
PBT loose tubes filled with water-blocking gel
Inner jacket made of halogen-free flame-retardant polymer compound
Corrugated steel tape armor
Fire-resistant cable remains functional under influence of flame during 180 minutes
Up to 288 fibers
Armor is a perfect protection from rodents
Easy to install and splice prep
|Crush — from 171 lb/in|
|Fiber count||up to 48 (6x8)||up to 72 (6x12)||up to 96 (6x16)||up to 144 (6x24)|
|Cable diameter, in||0.488||0.512||0.539||0.575|
|Cable weight, lb/ft||0.132||0.144||0.154||0.171|
|Min bending radius, in||7.323||7.677||8.091||8.622|
|Operation temperature||-58°F … 158°F|
|Installation temperature||14°F … 122°F|
|Transportation and storage temperature||-58°F … 122°F|
|Minimum bending radius||10x cable diameter|
|Life time||25 years|