InSky OPGW
Used by electric utilities on transmission lines with the voltage of 35 kV and higher for creating optical communication lines and protecting the power lines from lightning strikes.
InAir ADSS
Applied for aerial installation on distribution and power transmission lines for building long distance optical communication systems.
Specialty Cable
Used for distributed fiber optic sensing in different applications.
InFire Rated
Used for indoor and outdoor applications where fire resistance is a must. Remain functional under direct flame for at least 180 minutes.
InDuct
Applied in ducts, conduits and trays with no risk of rodent attacks. Can also be lashed.
InArmor
Designed for high reliability in harsh environments with potential mechanical impact. Applied in all ground types, swamps, and harsh rivers.
BlownIn
Designed for air blowing in ducts and microducts for building reliable underground communication networks.
InWater
Designed for underwater application with increased crush and tensile loads.
InAir Figure 8
Used for cost-effective one-step aerial installation mostly in rural areas where the spans between poles are not long .
InControl
Applied in substations for control purposes.
InHome FTTH
Used to create communication lines between the common distribution box and a location inside the building (including vertical runs), between entrances or corridors in office buildings.
InDrop FTTH
Applied for aerial installation on transmission towers, lightning poles, between buildings and structures for communication networks in rural areas.
1. OPGW, ADSS, and other self-supporting Incab aerial cables.
You may use IEEE Standard 524-2016 as a general guideline for installing these types of cables from Incab. However, you should refer to our datasheet and our detailed installation guidelines for the specific Incab cable that you are working with.
To obtain a copy of our datasheet or our detailed installation instructions, please send us an email at support@incabamerica.com.
2. For all other types of Incab cable, please refer to our datasheets and standard industry practice.
If you have any questions or need any additional information, please contact us at support@incabamerica.com.
Technical Guideline: PBT Loose Tube Cable Mid-Span Access for Splicing
