Used by electric utilities on transmission lines with the voltage of 35 kV and higher for creating optical communication lines and protecting the power lines from lightning strikes.
Applied for aerial installation on distribution and power transmission lines for building long distance optical communication systems.
Used for distributed fiber optic sensing in different applications.
Used for indoor and outdoor applications where fire resistance is a must. Remain functional under direct flame for at least 180 minutes.
Applied in ducts, conduits and trays with no risk of rodent attacks. Can also be lashed.
Designed for high reliability in harsh environments with potential mechanical impact. Applied in all ground types, swamps, and harsh rivers.
Designed for air blowing in ducts and microducts for building reliable underground communication networks.
Designed for underwater application with increased crush and tensile loads.
InAir Figure 8
Used for cost-effective one-step aerial installation mostly in rural areas where the spans between poles are not long .
Applied in substations for control purposes.
Used to create communication lines between the common distribution box and a location inside the building (including vertical runs), between entrances or corridors in office buildings.
Applied for aerial installation on transmission towers, lightning poles, between buildings and structures for communication networks in rural areas.
Drop cable is used for distribution of the broadband communication networks in rural areas. It is suspended on power transmission towers, lighting poles, between buildings and structures. Drop cables can also be installed inside buildings, in cable trays and ducts, as well as on the external surface of the buildings.
Fiber optic drop cable must be both light and rigid enough, well protected from harsh weather conditions like wind and icing, and easy to install. The cost-effectiveness of the design also plays an important role.
Depending on your project needs are, Incab America offers a range of fiber drop cables:
InDrop Flat Type is a flat, self-supporting, fiber drop cable for aerial installation up to 328 ft
InDrop Flat Type Toneable is a flat type drop cable with a toning conductor
InDrop Round Type TB is single fiber tight-buffered drop cable for end-user or equipment connections
InDrop Round Type is a round drop cable suitable for installation between buildings, or for internal building feeds and distribution networks
Properly selected and installed cable will ensure stable signal transmission throughout the entire design life. If you need any assistance in selecting the cable with optimal characteristics for the technical requirements of your project and right accessories, Incab America technical support will make the necessary calculations for you.
Also check how Incab FTTH dropcables can be deployed as part of FTTH system.
Have a question?
Send a request