Used by electric utilities on transmission lines with the voltage of 35 kV and higher for creating optical communication lines and protecting the power lines from lightning strikes.
Applied for aerial installation on distribution and power transmission lines for building long distance optical communication systems.
Used for distributed fiber optic sensing in different applications.
Used for indoor and outdoor applications where fire resistance is a must. Remain functional under direct flame for at least 180 minutes.
Applied in ducts, conduits and trays with no risk of rodent attacks. Can also be lashed.
Designed for high reliability in harsh environments with potential mechanical impact. Applied in all ground types, swamps, and harsh rivers.
Designed for air blowing in ducts and microducts for building reliable underground communication networks.
Designed for underwater application with increased crush and tensile loads.
InAir Figure 8
Used for cost-effective one-step aerial installation mostly in rural areas where the spans between poles are not long .
Applied in substations for control purposes.
Used to create communication lines between the common distribution box and a location inside the building (including vertical runs), between entrances or corridors in office buildings.
Applied for aerial installation on transmission towers, lightning poles, between buildings and structures for communication networks in rural areas.
The next-generation electric power system, known as Smart Grid, is expected to help solve the problem of energy shortage. The Smart Grid communication network, with its diverse structure, is a crucial component of the new power system. Incab InControl cables are optimized for use in substations using today’s Smart Grid technology control systems.
Currently Incab America offers the following design:
InControl Distribution TB DJ is a distribution tight-buffered design with double jacket. It is highly versatile and can be used both indoors and outdoors. It is very good for direct-buried installation in substations.
Typical features of InControl Distribution TB DJ:
This cable consists of a bundle of tight-buffered fibers. Fiberglass yarns are laid over the bundle of fibers. Outer jacket is made of halogen-free material. Fiberglass yarns are laid over an inner jacket. Outer jacket is orange. Anti-rodent “Masterbatch” is added to the cable jacket to repel rodents. InControl Distribution TB DJ has a wide range of operating temperatures from -22°F to +140°F and installation temperatures from +14°F to +122°F (operating temperature range can be increased on request).
Have a question?
Send a request