Applied in the construction of fiber-optic link on overhead transmission lines of 35 kV and more.
Applied for aerial installation on distribution and high voltage power lines, as well as railway catenary.
For fiber optic monitoring systems.
Used for stationary installation when the optical fiber needs extra protection from mechanical damages.
Applied in tubes, ducts, trays, blocks, tunnels, collecting channels, with no risk of rodent attacks. Also applied for aerial installation between supports and buildings on external strength members or using the winding method.
Applied in ducts, trays, blocks, tunnels, collecting channels, with a risk of rodent attacks.
Applied in harsh environments with potential mechanical impact: in all ground types, swamps and harsh rivers.
Applied in sea areas (coastal shelf and deep-sea), on navigable rivers, in lakes and water storage basins, in harsh environments, in bogs and unnavigable rivers.
InAir Figure 8
Applied for aerial installations: on power lines, lamp posts, between buildings and constructions. Suitable for aerial installation on transmission equipment and power facilities in dielectric package.
Applied inside buildings (including vertical runs), in trays, channels, on outer sides of buildings, as well as in duct, in tubes and blocks. Suitable for blowing-in into protecting polyethylene tubes.
Applied inside buildings and premises, in trays, cable channels, in duct, tubes and blocks. It is also applied on outer sides of buildings and for optical cords manufacturing.
Applied for aerial installation on transmission towers, lamp posts, between buildings and constructions.
Steel optical module, clad wire and temporary optical cable.
Monitoring of industrial and civil facilities using sensor cables provides continuous remote control of their condition
State of structural
elements of buildings
of sensitive facilities
Oil and gas wells
(operator room, server room)
1. DAU (data acquisition unit) - a server
that accumulates information
about the condition of all monitoring objects
and all control units.
2. APCS server
workstation integrated with
APCS of the customer
Optical Sensor Cable
(custom-designed based on
the installation conditions
and intended use) - a
sensing element that tracks,
changes in the external
a server including
DTS - Distributed Temperature Sensor
DAS - Distributed Acoustic Sensor
It analyzes and interprets signals
from the sensor cable
Sensor cable is installed
directly on the pipeline or
within 1 m from the pipeline
The final result: leak detection and activities control
on the main pipeline.
of technical facilities
Reduced environmental damage
caused by pipeline leaks
We design, manufacture and test specialty cables according to customers’ requirements.