Used by electric utilities on transmission lines with the voltage of 35 kV and higher for creating optical communication lines and protecting the power lines from lightning strikes.
Applied for aerial installation on distribution and power transmission lines for building long distance optical communication systems.
Used for distributed fiber optic sensing in different applications.
Used for indoor and outdoor applications where fire resistance is a must. Remain functional under direct flame for at least 180 minutes.
Applied in ducts, conduits and trays with no risk of rodent attacks. Can also be lashed.
Designed for high reliability in harsh environments with potential mechanical impact. Applied in all ground types, swamps, and harsh rivers.
Designed for air blowing in ducts and microducts for building reliable underground communication networks.
Designed for underwater application with increased crush and tensile loads.
InAir Figure 8
Used for cost-effective one-step aerial installation mostly in rural areas where the spans between poles are not long .
Applied in substations for control purposes.
Used to create communication lines between the common distribution box and a location inside the building (including vertical runs), between entrances or corridors in office buildings.
Applied for aerial installation on transmission towers, lightning poles, between buildings and structures for communication networks in rural areas.
8 April 2020
Incab has produced, tested and wound 500,000 kilometers of cable!
The cable that is later on suspended, laid in ducts, blown, pulled, buried, laid on the seabed or lowered in an oil well.
The cable that provides Internet access in homes and offices, factories, villages and cities. The cable that transmits signals from devices monitoring the objects state. The cable that ensures the perimeters are protected, and ground movement is recorded.
Thanks to every Incab employee for doing their best!
Thanks to dealers and partners for this long way!
The further the better!