InAir Figure 8

InAir Figure 8 MT FRP part no.
0067
Multi-Tube (MT) FiberGlass Rod (FRP)

A figure-8 design with all-dielectric strength element for applications where induced voltage and current must be eliminated.

1

Central strength member (dielectric fiberglass reinforced plastic)

2

Optical fiber

3

PBT loose tube filled with water-blocking gel

4

Water-swellable yarns

5

Jacket

6

Dielectric rod

7

Ripcord

All-dielectric design

Affordable alternative to InAir ADSS

Low installation cost

Maximum rated design tension (MRDT) 899 lb (4 kN)
Crush 126 lb/in (0.22 kN/cm)
External strength member jacket diameter, in 0.256
Fiber count, up to 48 72 96 144
Cable jacket diameter, in 0.366 0.409 0.469 0.594
Maximum overall cable size, in 0.701 0.744 0.803 0.929
Cable weight, lb/ft 0.072 0.084 0.1 0.155
Maximum rated design tension (MRDT) 1349 lb (6 kN)
Crush 126 lb/in (0.22 kN/cm)
External strength member jacket diameter, in 0.295
Fiber count, up to 48 72 96 144
Cable jacket diameter, in 0.366 0.409 0.469 0.594
Maximum overall cable size, in 0.74 0.783 0.843 0.969
Cable weight, lb/ft 0.072 0.084 0.1 0.155
Operating temperature -58°F ... +158°F
Installation temperature -22°F ... +122°F
Transportation and storage temperature -58°F ... +158°F
Minimum bending radius 15 x cable diameter
Design life 25 years