Applied in the construction of fiber-optic link on overhead transmission lines of 35 kV and more.
Applied for aerial installation on distribution and high voltage power lines, as well as railway catenary.
For fiber optic monitoring systems.
Used for stationary installation when the optical fiber needs extra protection from mechanical damages.
Designed for duct installations Applied in duct, trays, blocks, tunnels, collecting channels, with no risk of rodents’ attacks.Also applied for aerial installation between supports and buildings on external strength members or using the winding method.
Applied in ducts, trays, blocks, tunnels, collecting channels, with a risk of rodents’ attacks.
Applied in harsh environments with potential mechanical impact: in grounds of all the groups, bogs, unnavigable rivers.
Applied in sea areas (coastal shelf and deep-sea), on navigable rivers, in lakes and water storage basins, in harsh environments, in bogs and unnavigable rivers.
InAir Figure 8
Applied for aerial installations: on power lines, lamp posts, between buildings and constructions. Suitable for aerial installation on transmission equipment and power facilities in dielectric package.
Applied inside buildings (including vertical runs), in trays, channels, on outer sides of buildings, as well as in duct, in tubes and blocks. Suitable for blowing-in into protecting polyethylene tubes.
Applied inside buildings and premises, in trays, cable channels, in duct, tubes and blocks. It is also applied on outer sides of buildings and for optical cords manufacturing.
Applied for aerial installation on transmission towers, lamp posts, between buildings and constructions.
Steel optical module, clad wire and temporary optical cable.
Designed for duct installations Applied in duct, trays, blocks, tunnels, collecting channels, with no risk of rodents’ attacks.
Central strength member (dielectric fiberglass reinforced plastic)
PBT loose tube filled with water-blocking gel
Easy to install
Max. installation tensile loads 337 lb
Up to 432 fibers
|Crush — from 57 lb/in|
|Fiber count||up to 72||up to 96||up to 144||up to 216||up to 288||up to 432|
|Cable diameter, in||0.236||0.26||0.299||0.335||0.37||0.602|
|Cable weight, lb/ft||0.016||0.019||0.024||0.028||0.039||0.095|
|Min bending radius, in||3.543||3.898||4.488||5.02||5.551||9.035|
|Operation temperature||-49°F … 158°F|
|Installation temperature||-22°F … 122°F|
|Transportation and storage temperature||-76°F … 158°F|
|Minimum bending radius||15x cable diameter|
|Life time||25 years|
|Warranty||as specified in the supply agreement, min 2 years|
Have a question?
Send a request