Applied inside buildings (including vertical runs), in trays, channels, on outer sides of buildings, as well as in duct, in tubes and blocks. Suitable for blowing-in into protecting polyethylene tubes.
Applied in ducts, trays, blocks, tunnels, and collecting channels in protecting tubes.
Also applied for aerial installation power lines, lamp posts, between buildings and constructions. Suitable for aerial installation on transmission equipment and power facilities.
- 4Halogen free flame-retardant jacket
- 3Strength members: aramid yarns
- 1Optic fiber
Suitable for aerial installation up to 50 m
More flexible compared to the Riser Cable
Perfect solution for offices and data centers
Up to 48 fibers
Resistance to crushing loads from 100 N/cm
Allowable tensile strength up to 400 N
Tight-Buffered Distribution Cable
Tight-Buffered Distribution for indoor installation— from 57 lb/in
Tight-Buffered Distribution for indoor and outdoor installation — from 114 lb/in
Tight-Buffered Distribution for indoor installation — 90 lb — operation; 180 lb — installation
Tight-Buffered Distribution for indoor and outdoor installation — 180 lb — operation; 360 lb — installation
Tight-Buffered Distribution for indoor installation
|Cable diameter, in||0.173||0.193||0.224||0.252||0.276||0.311||0.390||0.409||0.457|
|Cable weight, lb/ft||0.015||0.018||0.024||0.030||0.035||0.044||0.056||0.061||0.073|
|Min bending radius, in||1.732||1.929||2.244||2.520||2.756||3.110||3.898||4.094||4.567|
Tight-Buffered Distribution for indoor and outdoor installation
|Cable diameter, in||0.185||0.205||0.232||0.256||0.280||0.319||0.398||0.417||0.461|
|Cable weight, lb/ft||0.017||0.020||0.026||0.031||0.036||0.046||0.035||0.036||0.041|
|Min bending radius, in||1.850||2.047||2.323||2.559||2.795||3.189||3.976||4.173||4.606|
At Customer’s request Incab can provide specifications for any range of fiber optic cable.
|Operation temperature range*|| -10°С…+50°С (Tight-Buffered Distribution for indoor installation, Distribution with micro tubes) |
-40°С…+60°С (Tight-Buffered Distribution fiber for indoor and outdoor installation)
|Installation temperature range||-10°С…+50°С|
|Transportation and storage temperature range||-50°С…+50°С|
|Min bending radius||10xcable diameter|
|Life time||25 years|
|Warranty lifetime||as specified in the supply agreement, min 2 years|
* Operation temperature range can be increased on request.
Local cables can be produced in versions ng(A)-HF, ng(А)-HFLTx and ng(А)-FRHFLTx.
ng(A)-HF — cable jacket is made of a polymer material, flame retardant in a group laying, with low smoke emission, halogen-free (Class PRGP1).
ng(A)- HFLTx — the cable jacket is made of a polymer material, flame retardant in a group laying with low toxicity of combustion products.
ng(A)-FRHFLTx — the cable jacket is made of a fire-resistant polymer material, flame retardant in a group laying, not emitting corrosive gases when burning and smoldering with low toxicity of combustion products.