InSky OPGW
Used by electric utilities on transmission lines with the voltage of 35 kV and higher for creating optical communication lines and protecting the power lines from lightning strikes.
InAir ADSS
Applied for aerial installation on distribution and power transmission lines for building long distance optical communication systems.
Specialty Cable
Used for distributed fiber optic sensing in different applications.
InFire Rated
Used for indoor and outdoor applications where fire resistance is a must. Remain functional under direct flame for at least 180 minutes.
InDuct
Applied in ducts, conduits and trays with no risk of rodent attacks. Can also be lashed.
InArmor
Designed for high reliability in harsh environments with potential mechanical impact. Applied in all ground types, swamps, and harsh rivers.
BlownIn
Designed for air blowing in ducts and microducts for building reliable underground communication networks.
InWater
Designed for underwater application with increased crush and tensile loads.
InAir Figure 8
Used for cost-effective one-step aerial installation mostly in rural areas where the spans between poles are not long .
InControl
Applied in substations for control purposes.
InHome FTTH
Used to create communication lines between the common distribution box and a location inside the building (including vertical runs), between entrances or corridors in office buildings.
InDrop FTTH
Applied for aerial installation on transmission towers, lightning poles, between buildings and structures for communication networks in rural areas.
Should be used when fiber optic capacity is not needed, or when additional fault current capacity is needed.
Central strength member (aluminum-clad steel wire)
Stranded wires (aluminum-clad steel wires and/or aluminum alloy wires)
Stranded wires (aluminum-clad steel wires and/or aluminum alloy wires)
InSky ACS Ground Wire (Aluminum-Clad Steel Ground Wire) is a standard component of high-voltage transmission lines. It can be used when fiber capacity is not needed or when additional fault current capacity is required. Aluminum-clad steel wires are highly corrosion-resistant and can be barely destroyed by heat during accidents. The technology of cladding ensures no peeling or crumbling of the aluminum.
InSky ACS Ground Wire manufactured by Incab has a proven design life of 50 years and rated breaking strength (RBS) from 6,744 up to 157,366 lb. ACS ground wires shield high-voltage conductors from lightning strikes. Aluminum-clad steel ground wires are typically used in regions with much higher lightning activity (such as the USA or Brazil), showing excellent reliability under real operating conditions. The electrical resistance of the InSky ACS ground wire is about 2 times lower, which means it is more resistant to short-circuit current. Relatively low weight of InSky ACS Ground Wire provides lower load on transmission line supports.
| Rated breaking strength (RBS), lb | 6744...157366 |
| Cable diameter, in | 0.276...1.339 |
| Cable weight, lb/ft | 0.134...2.016 |
| Cross-sectional area, in² | 0.054...0.93 |
| Operating temperature |
-58°F ... +185°F * -76°F ... +185°F upon request |
| Installation temperature | -22°F ... +122°F |
| Transportation and storage temperature | -58°F ... +185°F |
| Minimum bending radius | 20 x cable diameter |
| Design life | 50 years |
| Operating temperature | -76°F ... +185°F |
| Installation temperature | -22°F ... +122°F |
| Transportation and storage temperature | -76°F ... +158°F |
| Minimum bending radius | 20 x cable diameter |
| Design life | 50 years |
| Warranty period of operation | определяется договором поставки, но не менее двух лет empty |
Your guiding light
in Incab America universe
